fabia will no start

ger · 03-22-2009, 01:02 PM

Hi
I'm new here but my fabia1.2 will not start.
the engine will not turn over and the starter does not kick in. TH ecar is 3 years old.
All advice and help greatly appreciated!!
Also ther edoes not seem to be a click/clunk when I turn the key to start ( batt ok etc.
Ger

TDI 100 · 03-23-2009, 11:50 PM

First thing would be to Try jump starting
is this fails select 4rd gear and rock the car car back and fourth and try jump staring again.
If still FAILS TO START. Try bump starting.
If That does not work try hitting starter with somthing hard.
If this does not work try tow starting it.
Does everything else work ??

bjm · 03-29-2009, 07:36 PM

We've just had the RAC out to this today... in our case it was a broken wire to the solenoid on the starter. Aparently they are notorious for this. The wire to the starter is a bit short and the vibration of the engine eventually breaks the wire. Easy fixed, probably best to get the local auto-spark out if your not confident with a soldering iron, heat skrink and crimps.

03-22-2009, 01:02 PM	#1 (permalink)
ger Junior Member Join Date: Mar 2009 Location: ireland Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	fabia will no start Hi I'm new here but my fabia1.2 will not start. the engine will not turn over and the starter does not kick in. TH ecar is 3 years old. All advice and help greatly appreciated!! Also ther edoes not seem to be a click/clunk when I turn the key to start ( batt ok etc. Ger

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-23-2009, 11:50 PM	#2 (permalink)
TDI 100 Senior Member Join Date: Jan 2009 Location: BASILDON ESSEX Posts: 239 Thanks: 1 Thanked 5 Times in 5 Posts	First thing would be to Try jump starting is this fails select 4rd gear and rock the car car back and fourth and try jump staring again. If still FAILS TO START. Try bump starting. If That does not work try hitting starter with somthing hard. If this does not work try tow starting it. Does everything else work ??

03-29-2009, 07:36 PM	#3 (permalink)
bjm Junior Member Join Date: Mar 2009 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	We've just had the RAC out to this today... in our case it was a broken wire to the solenoid on the starter. Aparently they are notorious for this. The wire to the starter is a bit short and the vibration of the engine eventually breaks the wire. Easy fixed, probably best to get the local auto-spark out if your not confident with a soldering iron, heat skrink and crimps.